You are here:

Serving Dish

Prennek wooden serving dishes are aesthetically pleasing due to the contrast of the rustic, textured exterior against the smooth carved indents created in three sizes and with 1 to 3 dish sections.

£45.00£130.00

Description

Prennek wooden serving dishes are aesthetically pleasing due to the contrast of the rustic, textured exterior against the smooth carved indents created in three sizes and with 1 to 3 dish sections. As with all Prennek creations the grain of the each type of wood differs in colour and texture – all this factors result in unique final products. These dishes can be used to house most food products or decorative items.

Approximate sizes:

  • 1 Dish Section: 35cm x 20cm
  • 2 Dish Sections: 55cm x 20cm
  • 3 Dish Sections: 80xm x 30cm

There is variation in the shapes and sizes of these dishes. If unsure, or you have a particular request, please get in touch.

Making a Serving Dish – The Prennek Process

  • Source tree, I only use timber From trees less than 5 miles from my yard. (Some are wind blown, naturally fallen, or have to be removed under licence because they are dangerous).
  • All timber is milled at the Pennek off grid work shop / yard.
  • Timber is stacked, left to naturally air dry for a minimum of two years.
  • Select top cut (normally a waste cut from milling timber).
  • Mark out, power carve and hand chisel bowl shapes.
  • Then hand shape edges, using a traditional draw knife.
  • Cut board to length.
  • Sand and soften all edges.
  • Sand top and bottom of board through four different grades.
  • Water pop board, to raise the grain.
  • Final sanding.
  • Add Prennek brand logo.
  • Apply 2 coats of food safe mineral oil over whole board.
  • Apply 2 coats of oil / bees wax mix.
  • If required for particular board – add rubber feet with stainless steel screws.
  • Final check, Serving Dish complete – ready to add to the online collection.

Additional information

Size

1 Dish Section, 2 Dish Sections, 3 Dish Sections

You might also like...